(as of Oct 30,2019 18:55:48 UTC – Details)
1.SinLoon 1-Pair RJ45 Splitter Adapter Sharing Kit with 2 PCS Cat6 Cable mainly used to solve connection problem caused by insufficient wiring.<br>
2.Solve the Network wifi signal weak and connection problem caused by insufficient wiring: such as the basement, the attic, the remote house, 2 or more devices online<br>
3. Widely used ： compatible with Cat 7 Cat6 Cat5 Cat5e Network Ethernet Cable and can compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer,etc.<br>
Case 1:If when decorating, weak current connect to a TV in living room by only one network wire string,and signal of the router in the weak current is weak.
1.The iTV port of fiber optic modem connect to RJ45-A port marked”2″, <br>
2.The router of fiber optic modem connect to RJ45-A port mark”1″, <br>
3.RJ45-A the third port unmarked connect to network wall plate in the living room by wires embedded in the wall. <br>
4.The wall plate connect to the other RJ45-B adapter. <br>
5.The port of RJ45-B marked”1″ connect to router. <br>
6.The port of RJ45-B marked”2″ connect to the set-top box. <br>
Set-top boxes and routers can work simultaneously. <br>
If fiber optic modem left one port and two rooms has network wires.And one of the room is equipped with a router, then using this two RJ45 adapter can make you surf Internet in another room. <br>
a.The last port of fiber optic modem connect to RJ45-A port marked”2″,<br>
b.The computer without router connect to RJ45-A port marked”1″,<br>
c.RJ45-A the third port unmarked connect to RJ45-B the third port unmarked by wires embedded in the wall.<br>
d.WAN port of the router connect to RJ45-B port marked”2″<br>
e.LAN port of router connect to RJ45-B port marked”1″,<br>
f.Two computers in different rooms can surf the Internet at the same time. <br>
Use a network cable to connect two POE monitors simultaneously.For POE devices that are transmitted over a long distance,and the power outlet is not sufficient,you can install one pair of splitters to save a network cable.It is cost savings and convenience. <br>
a.The POE switch (1236PIN power supply) connect to RJ45-A Ports marked”1″ and marked”2″. <br>
b.The another end RJ45-A third Port unmarked connect to RJ45-B Port unmarked <br>
c.The another end RJ45-B Ports marked”1″ and “marked”2” connect to 2 POE monitors. <br>
SinLoon Ethernet splitter Specially idear for Solve theNetwork wifi signal weak and connection problem caused by insufficient wiring: such as the basement, the attic, the remote house, 2 or more devices online
the 1-pair rj45 8P8C LAN Ethernet Splitter connector is compatible with Cat 7 Cat6 Cat5 Cat5e Network Ethernet Cable and can compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer,etc.
Please follow the images instructions to use a pair of RJ45 Splitter Coupler at the same time.The speed of each cable groups (1 and 2) can only reach 100 megabytes.And the signal transmission of two cable groups are not interfered with each other.RJ45-A interface port”1″ is corresponding to RJ45-B interface port”1″.RJ45-A interface port”2″ is corresponding to RJ45-B interface port”2″.They can’t be reversed.
The adapter divide original embedded Ethernet cables (8pins) into two groups (1236/4578). Two groups respectively transmit data with purely physical connection which don’t have the function of the assign IP addresses.
This adapter is not the same as a network router or network switch without the function of the assign IP addresses.