Press "Enter" to skip to content

Cable Matters RJ45 Splitter Ethernet Cable Share Kit in White 100 Mbps (Must Be Used in Pairs, One Unit On Each End of An Ethernet Cable Run)

adminwho 0


Price: $11.99
(as of Oct 26,2019 10:38:41 UTC – Details)


Product Description

Cable Sharing Kit

The Cable Matters RJ45 Ethernet Cable Sharing Splitter Kit connects two network devices over a single network cable to two ports on an Ethernet router or switch. It SPLITS the 4 pairs of a network cable to SHARE a cable for 2 devices. Plug & Play installation to a an RJ45 wall plate or female coupler at each end of an Ethernet cable.

Connection Checklist

1) Ethernet Cat 5/5e/6 cable with all 4 pairs connected
2) Cable terminated into a wall plate or connected with a female RJ45 coupler
3) Four Ethernet patch cords (2 at each end)
4) Two available ports on the Ethernet router or switch
 

Important Notes

– Each connected device requires a dedicated router/switch port
– Gigabit Ethernet is not supported over 2 pairs
– Not recommended for PoE applications

Specifications

– Wall Outlet/Coupler Connector: 1 x 8P/8C RJ45 Male
– Device/Switch Connector: 2 x 4P/4C RJ45 Female
– Max Speed Rating: 100Mb

RJ45 SPLITTER KIT splits the cable pairs on an existing Cat 5/5e/6 cable into two separate outlets to connect two devices such as a computer or printer; Connect the other end to TWO DEDICATED router or switch ports; Each device requires a separate network port
CABLE SHARING KIT is an ideal solution for connecting two devices in a remote location with an existing network cable drop; Check that all four pairs are terminated into the wall outlet; Alternatively, use a long Ethernet patch cable with female RJ45 couplers (sold separately) at each end as a solution for locations without any network cabling
VOIP SHARED APPLICATION in an office location that needs to add an IP phone next to a computer that can run on shared 100Mb (Fast Ethernet) speeds over Cat 5e; Requires separate ports on a network switch; PoE is not a recommended use
ETHERNET CABLE SPLITTER splits pairs 2 & 3 into Jack 1 and pairs 1 & 4 into Jack 2 for sharing two device signals over a single cable; Each device requires a dedicated router or switch port
CONNECTION CHECK LIST includes an 1) Ethernet Cat 5/5e/6 cable with all 4 pairs connected; 2) Cable terminated into a wall plate or connected with a female RJ45 coupler; 3) Four Ethernet patch cords (2 at each end); 4) Two available ports on the Ethernet router or switch



Leave a Reply

Your email address will not be published. Required fields are marked *