(as of Oct 27,2019 02:39:21 UTC – Details)
Expand your wired network capabilities with an Echogear Gigabit Ethernet Switch. It has all the fancy specs for speedy & reliable network performance, plus it’s incredibly easy to use. Nothing is more frustrating than laggy internet or buffering. Gaining extra Ethernet ports can help perfect your home theater, office, or gaming setup. Every device you connect to this switch can get speeds up to 1 Gigabit (1000mbps). Connect up to 5 devices to the switch.
Every Ethernet device runs at either 10Mbps, 100Mbps, or 1000Mbps. All 3 speeds are supported with this switch which future-proofs your setup. Not sure what you’ve got? NWay auto-negotiation chooses the fastest maximum speed supported by your connected devices. You’ll get the fastest connection your hardware allows, every time. Struggling with streaming video or gaming on your wireless network? Ditch WiFi and get on Ethernet. Reach speeds up to 1 gigabit while avoiding annoying signal quality problems.
No Traffic Jam Here
Built with full-duplex flow control, your devices can send and receive information at the same time, which speeds up your network. This unmanaged switch intelligently manages signals from all your devices for optimal speeds & no packet loss.
Compact & Quiet
After it’s set up, you should notice an Ethernet switch. Ours is compact enough to be tucked away or mounted behind something. Plus, you won’t hear it. With the near-silent operation, you won’t get distracted by annoying fan sound.
The Nerdy Stuff
Dimensions: 3.6” x 2.5”x 0.75”
5x 10/100/1000Mbps RJ45 ports
10Gbps switching capacity
Full-duplex flow control
Auto uplink (MDI/MDI-X)
MAC Address Table: 8k
Link & activity LED lights
Supports 802.3 Ethernet, 802.3u Fast Ethernet or 802.3ab Gigabit Ethernet
Can it transport you to the Matrix? Not likely
Get the fastest connection between wired devices. This Ethernet switch supports speeds up to 1 Gigabit (1000 Mpbs) on 5 ports.
No one likes looking at cables, so keep your switch out of the way. Built to be lightweight and compact, you’ll have no problem hiding your switch. It’s even wall-mountable if you’re into that sort of thing.
Complicated setup? Nah. Just plug the Ethernet switch into the wall, and connect up to 8 Ethernet cables. You’ll have an expanded home network in minutes.
The Nerdy Stuff
No matter what type of Ethernet cable you’ve got, it’ll work with an Echogear switch. Auto MDI/MDI-X technology enables crossover and straight-through cables to work in any orientation.
This is one negotiation you’ll win for sure. Auto-negotiation dynamically chooses the best speed for connected devices. All your wired components will operate at maximum speed. Supports communication between 10 Mbps, 100 Mbps, and 1000 Mbps (Gigabit) devices.
No stoplights for your data. Full-duplex flow control lets your devices send & receive data at the same time. That way you aren’t waiting for your data to get where it needs to go. Now we just gotta work on our vertical suplex.
3.6” x 2.5” x 0.75”
6.8” x 4.3” x 1.2”
Comes With Flux Capacitor?
Expand your network’s number of gigabit Ethernet ports with this unmanaged switch. 5 RJ45 ports support newer devices with speeds of up to 1Gpbs (1000mbps). Also backward compatible to work with 10mbps & 100mbps.
Plug & play setup couldn’t get any easier. Just power it up and add up to 5 ethernet cables. Compact design is easy to keep out of sight. Integrated mounting holes even let you hang it on the wall.
Auto-negotiation ensures the highest possible speed between connected devices. Supports 10mbps, 100mpbs, & 1 Gigabit (1000mbps) connections.
Full-duplex flow control enables devices to send and receive information at the same time, reducing network latency without packet loss.
Not all ethernet cables are the same, but you don’t need to worry about what type you have. Auto MDI/MDI-X technology makes both crossover and straight-through cables compatible with your wired network.