Press "Enter" to skip to content

PoE Texas POE-8-48v60w | 8 Port Passive 10/100 Power Over Ethernet Midspan Injector for IP Cameras, VOIP Phones or Access Points | with 48 Volts, 60 Watts Total Power

adminwho 0


Price: $51.49
(as of Oct 30,2019 10:48:40 UTC – Details)



Our Best Selling PoE Injector! Use this reliable Passive PoE midspan to instantly add power to your existing network switch or router. The POE-8-48v60w provides power on the spare data wires (Mode B) of the Cat5, Cast5e or Cat6 Ethernet cable. Passive “always on” power means that all devices will receive the same voltage (48v). The included power supply provides 60 watts total available power for all devices combined. Consumption varies per device and model – Please check device specs for power needs to ensure that you have adequate wattage to support all 8 ports.
* NOTE: This is not a switch – you use it to add PoE to any switch or router Product Features
Proven reliability since 2011
Extends power up to 328 ft or 100 meters
10/100 Mbps Fast Ethernet data rate
Adds PoE to any network switch or router
Power up to 8 Cameras, WiFi AP’s or IP Phones with 60 watts total combined power
Power any 802.3af device
Power any “12v,PoE” device (see our video for info)
Designed for wall mount installation
8 data in, 8 data + PoE out
Passive PoE – Power is on all the time
2.1mm DC connector Power Supply Included
48 volts DC, 1.25 amps, 60 watts
110 to 220 volt AC operation
90% efficient
UL, CE and FCC approved
Reversing cable for Cisco 7940 and 7960 is included Other products from PoE Texas
POE-8-48v120w – 120 available watts (double the power)
POES-8-7-48v60w – Passive 7-port integrated switch
GPOE-4A-48v48w – 4 Port injector with Gigabit data
POE-16-48v120w – 16 ports, 120 watts
POE-Tester – Handheld voltmeter to display power used by a device
GAF-5v10w and GAF-12v12w – 5 and 12 volt step down converters for non-PoE devicesAs always, our products are backed by our 1-year manufacturer warranty

Use to expand your network by adding PoE Power for up to 8 devices at 328 feet away – works with your existing network switch or router
Includes a 48 volt, 60 watt UL certified power supply and reversing cable for Cisco 7940 and 7960
Use to provide PoE power and 10/100 data for eight 802.3af Cameras, WiFi AP’s or IP Phones with 60 watts total combined power
Passive Mode B operation (pins +4,5/-7,8) is “always on”
For expert technical support from Austin, TX please call 512 479 0317



Leave a Reply

Your email address will not be published. Required fields are marked *